Cisco Meraki MR45-HW  

Radios:

2.4 GHz 802.11b/g/n/ac client access radio

5 GHz 802.11a/n/ac Wave 2 client access radio

2.4 GHz & 5 GHz dual-band WIDS/WIPS, spectrum analysis, and location analytics radio

2.4 GHz Bluetoth Low Energy (BLE) radio with Beacon and BLE scanning support Concurrent operation of all three radios

Supported frequency bands (country-specific restrictions apply):

2.412-2.484 GHz

5.150-5.250 GHz (UNII-1)

5.250-5.350 GHz (UNII-2)

5.470-5.600, 5.660-5.725 GHz (UNII-2e)

5.1725-5.825 GHz (UNII-3)

Antenna:

Internal omni antennas (5.4 dBi gain at 2.4 GHz, 6 dBi gain at 5 GHz)

Individual antenna elements for each radio

802.11ax Compatible, 802.11ac Wave 2 and 802.11n Capabilities:

DL-OFDMA, TWT support

4 x 4 multiple input, multiple output (MIMO) with four spatial streams

SU-MIMO and DL MU-MIMO support

Maximal ratio combining (MRC) and beamforming

20 and 40 MHz channels (802.11n); 20, 40, and 80 MHz channels (802.11ac Wave 2)

Up to 1024-QAM on both 2.4 GHz & 5 GHz bands

Packet aggregation

Power:

Power over Ethernet: 42.5-57 V (802.3at compliant)

Alternative 12 V DC input

Power consumption: 18 W max

Power over Ethernet injector and DC adapter sold separately

Interfaces:

1x 1000/2.5G BASE-T Ethernet

1x DC power connector (5.5 mm x 2.5 mm, center positive)

Mounting:

All standard mounting hardware included

Desktop, ceiling, and wall mount capable

Ceiling tile rail (9/16, 15/16, or 1 1/2” flush or recessed rails), assorted cable junction boxes

Bubble level on mounting cradle for accurate horizontal wall mounting

Physical Security:

Two security screw options included 13.5 mm long, 2.5 mm diameter, 5 mm head

Kensington lock hard point

Concealed mount plate with anti-tamper cable bay

Environment:

Operating temperature: 32 °F to 104 °F (0 °C to 40 °C)

Humidity: 5% to 95%

Physical Dimensions:

12.05” x 5.06” x 1.74” (30.6 cm x 12.84 cm x 4.426 cm), not including deskmount feet or mount plate

Weight: 28.22 oz (800 g)

Security:

Integrated Layer 7 firewall with mobile device policy management

Real-time WIDS/WIPS with alerting and automatic rogue AP containment with Air Marshal

Flexible guest access with device isolation

VLAN tagging (802.1Q) and tunneling with IPSec VPN

PCI compliance reporting

WEP, WPA, WPA2-PSK, WPA2-Enterprise with 802.1X

EAP-TLS, EAP-TTLS, EAP-MSCHAPv2, EAP-SIM

TKIP and AES encryption

Enterprise Mobility Management (EMM) & Mobile Device Management (MDM) integration

Cisco ISE integration for guest access and BYOD posturing

Quality of Service:

Advanced Power Save (U-APSD)

WMM Access Categories with DSCP and 802.1p support

Layer 7 application traffic identification and shaping

Mobility:

PMK, OKC, and 802.11r for fast Layer 2 roaming

Distributed or centralized Layer 3 roaming

Analytics:

Embedded location analytics reporting and device tracking

Global L7 traffic analytics reporting per network, per device, and per application

LED Indicators:

1 power/booting/firmware upgrade status

Regulatory:

RoHS

For additional country-specific regulatory information, please contact Meraki Sales

Compliance:

EN 60601-1-2 EMC requirements for the Medical Directive 93/42/EEC

Ordering Information:

MR45-HW: Meraki MR45 Cloud Managed 802.11ax Compatible AP

MA-PWR-30W-XX: Meraki AC Adapter for MR Series (XX = US/EU/UK/AU)

MA-INJ-4-XX: Meraki Gigabit 802.3at Power over Ethernet Injector (XX = US/EU/UK/AU)

MA-INJ-5-XX: Meraki Multigigabit 802.3at Power over Ethernet Injector (XX = US/EU/UK/AU)

Note: Meraki access point license required