Cisco IR807G-LTE-NA-K9  

Memory

Default and maximum DRAM

1 GB

Default and maximum flash memory

4 GB

IP rating

IP30

Physical characteristics

Physical dimensions (H x W x D)

1.84” x 5.07” x 4.37” (46.74 x 128.78 x 110.99 mm)

Weight

1 lb 5 oz. (0.6 kg)

Mounting options

Panel, wall, and DIN rail (vertical and horizontal) mount

Power consumption

At idle: 4.5W

Typical: 6.7W

Maximum: 10W

Interface support

Console

Mini type-B USB

WAN interfaces

WWAN with multimode 4G LTE, 3.7G, 3.5G, 3G, and 2G speeds; IR807G-LTE-VZ-K9 does not support 3G and 2G. IR807G-LTE-NA-K9 does not support 2G

LAN and WAN interfaces

Two 10/100BASE-T fast Ethernet ports

LEDs

●   System OK

●   WWAN

●   Link for Ethernet WAN ports

●   GPS

●   RSSI

●   VPN

●   User-configurable LED

●   SIM presence

●   ALARM

Serial interface

●   2 isolated RS-232 ports

●   Support for asynchronous mode with speed up to 115,200 baud

Serial protocol support

SCADA, DNP3, T101-104, Raw Socket TCP and UDP, and SLIP

Diagnostics

Mini type-B USB for remote cellular WAN diagnostics and monitoring

Environmental characteristics

Environmental operating temperature range

–40 to 140°F (–40 to 60°C) in a sealed NEMA cabinet with no airflow

–40 to 158°F (–40 to 70°C) in a vented cabinet with 40 linear feet per minute (LFM) of air

–40 to 167°F (–40 to 75°C) in a forced air enclosure with 200 LFM of air

Type tested at 85°C for 16 hours

Operating altitude

50ºC up to 5000 ft (above 5000 ft derate maximum operating temperature 1.50°C per 1000 ft)

Maximum altitude: 10,000 ft

Standard safety certifications

●   UL 60950-1, 2 nd edition

●   CAN/CSA C22.2 No. 60950-1, 2 nd edition

●   EN 60950-1, 2 nd edition

●   CB to IEC 60950-1, 2 nd edition with all group differences and national deviations

Hazardous locations standards

●   ANSI/ISA 12.12.01 (Class 1, Div 2 A-D)

●   CSA 213 (Class 1, Div 2 A-D)

●   IEC 60079-0 and -15 IECEx test report (Class I, Zone 2, gas groups IIC)

●   EN 60079-0 and -15 ATEX certification (Class I, Zone 2, gas groups IIC)

Industry standards

●   IEC 61850-3

●   IEEE 1613

EMC emissions

FCC 47 CFR Part 15 Subpart C Class A

EN 55032/CISPR 32 Class A, EN 55022 Class A

CISPR 11 Class A, ICES 003 Class A, CNS 13438 Class A

EN 300 386

EMC immunity

CISPR 35, EN 55024

EN 61000-4-2, 3, 4, 5, 6, 8, 9, 16, 17, 18, and 29

Radio cellular

EN 301 908 -1, 2, and 13

EN 301 511

FCC 47 CFR Part 22

FCC 47 CFR Part 15 Subpart C

FCC 47 CFR Part 2 MPE

RSS 102/247

Power specifications

Minimum and maximum voltage: 9.6 to 60V DC input

Maximum and minimum current: 1.04A (9.6V DC) and 0.17A (60V DC)