Cisco IR809G-LTE-GA-K9  

Memory

Default and maximum DRAM

2 GB

Default and maximum flash memory

4 GB

IP rating

IP30

Interface Support

Console

●  Mini type-B USB; also supports remote 4G LTE diagnostics and monitoring tools

WAN interfaces

●  WWAN with multimode 4G LTE, 3.7G, 3.5G, 3G, and 2G speeds; IR809G-LTE-LA-K9 does not support 2G

LAN and WAN interfaces

●  Two 10/100/1000BASE-T Gigabit Ethernet ports

LEDs

●  System OK (green and amber)

●  WWAN (green)

●  Speed and link for Gigabit Ethernet WAN port (green)

●  Speed and link for all Fast Ethernet LAN ports (green)

Serial interface

●  1 RS-232 and 1 RS-232/RS-485

●  Support for asynchronous mode with speed up to 115,200 baud

Serial protocol support

●  SCADA, DNP3, T101-104, Raw Socket TCP and UDP, and SLIP

Physical Characteristics

Physical dimensions (H x W x D)

1.15 x 5.05 x 6.27 in. (29.21 x 128 x 159.2 mm)

Weight

1 lb 11 oz. (0.77 kg)

Mounting options

Panel and door and DIN rail mount

Mean time between failure (MTBF; ground benign)

440,000 hours or more

Platform power consumption

Idle = 12W

Typical = 15W

Maximum = 19W

Environmental operating temperature range

–40 to 140°F (–40 to 60°C) in a sealed NEMA cabinet with no airflow

–40 to 158°F (–40 to 70°C) in a vented cabinet with 40 linear feet per minute (LFM) of air

–40 to 167°F (–40 to 75°C) in a forced air enclosure with 200 LFM of air

Type tested at 85°C for 16 hours

Operating altitude

50ºC up to 5000 ft (above 5000 ft derate maximum operating temperature 1.50°C per 1000 ft) Maximum altitude: 10,000 ft

Standard safety certifications

●  UL 60950-1, 2nd edition

●  CAN/CSA C22.2 No. 60950-1, 2nd edition

●  EN 60950-1, 2nd edition

●  CB to IEC 60950-1, 2nd edition with all group differences and national deviations

Hazardous locations standards

●  ANSI/ISA 12.12.01 (Class 1, Div 2 A-D)

●  CSA 213 (Class 1, Div 2 A-D)

●  IEC 60079-0 and -15 IECEx test report (Class I, Zone 2, gas groups IIC)

●  EN 60079-0 and -15 ATEX certification (Class I, Zone 2, gas groups IIC)

Industry standards

●  IEC 61850-1

●  IEEE 1613

EMC emissions

FCC 47 CFR Part 15 Subpart C Class A

EN 55032/CISPR 32 Class A, EN 55022 Class A

VCCI Class A, AS/NZS CISPR 32 Class A

CISPR 11 Class A, ICES 003 Class A, CNS 13438 Class A

KN 32 Class A, EN 300 386

EMC immunity

CISPR 35, EN 55024

KN 35

EN 61000-4-2, 3, 4, 5, 6, 8, 9, 16, 17, 18, and 29

Radio cellular

AS/NZS: ACMA EMR, and AS/CA S042.1 and 4

Japan: Articles 2 and 9

EN 301 489-1, 7, 24, and 52

EN 301 908 -1, 2, and 13

EN 301 511

EN 50385 MPE

FCC 47 CFR Part 22

FCC 47 CFR Part 15 Subpart C

FCC 47 CFR Part 2 MPE

RSS 102/247

Power specifications

Minimum and maximum voltage: 9.6 to 60V DC input

Maximum and minimum current: 2A (9.6V DC) and 0.4A (60V DC)